Company Profile

Flow Meter Supplier Malaysia: Sourcing Industrial Instrumentation Across Southeast Asia

Quick Answer

Silver Automation Instruments supplies industrial flow meters from stock to Malaysia and the wider ASEAN region. We keep electromagnetic, Coriolis, ultrasonic, vortex, and oval gear meters ready for water treatment, palm oil processing, chemical dosing, and diesel fuel custody transfer. Ask for a quotation by sending us your pipe size (DN), flow range, pressure (bar), and temperature (°C).

Why Malaysian Plants Buy from Silver Instruments

Engineers at a palm oil mill in Johor told us they struggled with local lead times for a 4‑inch sanitary electromagnetic flow meter. They needed it for crude palm oil transfer at 80°C with CIP cleaning cycles. We shipped a DN100 PTFE‑lined mag meter with 316L electrodes from our Singapore forward‑stock location in 5 working days. That kind of speed matters when a holding tank is nearly full and production cannot stop.

Malaysian water utilities repeatedly ask for battery‑powered flow meters for district metering zones in Selangor and Penang. We supply IP68 electromagnetic flow meters with built‑in GSM loggers. One utility measured night‑flow minimums as low as 1.2 L/s in a DN200 ductile iron main. They detected a leak within the first week of data collection. The meter paid for itself in under three months at the domestic water tariff rate.

Flow Meter Types Commonly Specified in Malaysia

Electromagnetic Flow Meters for Water and Effluent

IWKA and IWK contractors across Malaysia require MS 1596 and ISO 4064 compliance for raw water intake and treated effluent discharge. Our mag meters come in sizes from DN15 to DN2000, with rubber or PTFE liners and Hastelloy or 316L electrodes. Outputs include 4‑20 mA HART, RS485 Modbus, and pulse for remote totalizers. In a recent Langat River abstraction project, we provided 8 units of DN500 rubber‑lined meters with dual‑frequency excitation to handle low conductivity surface water down to 20 µS/cm.

Coriolis Mass Flow Meters for Palm Oil and Oleochemicals

Refineries in Pasir Gudang and Bintulu measure CPO, RBD palm olein, and fatty acid distillates by mass. A Coriolis meter eliminates the density‑temperature table corrections that volumetric meters require. We install a DMF‑1‑6 Coriolis sensor with a remote transmitter, measuring flow up to 12 t/h at 0.15% mass accuracy. The meter handles fluid temperatures up to 150°C and viscosities from 1 cP to over 500 cP, common during startup with partially solidified oil. Send us your operating density (kg/m³) and viscosity at running temperature. We will size the meter and confirm the pressure drop for your line.

Vortex Flow Meters for Steam and Compressed Air

Electronics factories in Kulim Hi‑Tech Park and food plants in Shah Alam use saturated steam at 6 bar to 10 bar for sterilization and jacketed kettles. We supply vortex flow meters with integrated PT100 temperature sensors for pressure‑compensated mass flow output. A DN50 wafer‑style meter with a tri‑clamp connection fits clean steam lines without requiring gasket changes. We have seen customers reduce boiler diesel consumption by 8% to 12% after fitting a vortex meter on the main steam header, because the energy management system finally had real‑time mass flow data instead of guessing from feedwater pump runtime.

Oval Gear Flow Meters for Diesel and Fuel Oil Custody Transfer

Contractors fueling gensets at remote telecom towers in Sarawak and Sabah need a compact mechanical counter flow meter that does not depend on power. Our oval gear meters with a mechanical register and 2‑wire reed pulse output work from 2 L/h to 30,000 L/h. For a diesel bowser operator in Kuching, we paired a DN25 oval gear meter with a 5‑digit resettable batch counter. The meter body is cast iron with PPS gears, compatible with diesel viscosity at 3 cP to