Current position > Product detail
『Electric remote transmission glass rotor flowmeter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
What is the working principle of LZB glass rotor flowmeter? I urgently need an answer... The rotor flowmeter consists of two components, one of which is a conical tube that gradually expands from bottom to top; The other component of the rotor flowmeter is a rotor that is placed in a conical tube and can move freely along the centerline of the tube. When measuring the flow rate of a fluid with a rotor flowmeter, the measured fluid flows in from the lower end of the conical tube, and the flow of the fluid impacts the rotor, generating a force on it (the magnitude of this force varies with the flow rate); When the flow rate is large enough, the force generated lifts the rotor and raises it. At the same time, the measured fluid flows through the annular section between the rotor and the conical tube wall, and exits from the upper end. When the force acting on the rotor during the flow of the measured fluid is exactly equal to the weight of the rotor in the fluid (referred to as the displayed weight), the force on the rotor is in equilibrium and stays at a certain height. Analysis shows that; The position and height of the rotor in the conical tube correspond to the flow rate it passes through. Therefore, by observing the position and height of the rotor in the conical tube, the corresponding flow rate value can be obtained. In order to prevent the rotor from touching the pipe wall when moving along the centerline of the conical tube, two methods are usually used: one is to install a guide core rod at the center of the rotor to keep the rotor moving up and down on the centerline of the conical tube, and the other is to open a groove at the edge of the rotor disk. When the fluid flows through the rotor from bottom to top,_600x400.jpg)
2. Where is the applicable area for posting floating ball flow meters?
Floating ball flow meters (also known as rotor flow meters) have high applicability in six major scenarios and are one of the widely used types of flow meters.
Process industry scenarios cover fields such as electricity, petrochemicals, chemicals, metallurgy, and pharmaceuticals, and can be used as intuitive flow indicators or on-site flow measurement instruments with low accuracy requirements, such as monitoring the flow of various fluids in chemical production processes. 2. The typical application of public utility scenarios is in the sewage treatment process, used to monitor and control the flow of sewage. 3. Flow alarm places such as cable inert protection gas flow monitoring (abnormal increase in flow usually indicates the existence of leakage points), circulating cooling systems, and water or air flow interruption/reduction alarm scenarios in cultivation tanks. Glass tube float flow meters with upper and lower limit flow alarm functions can be selected for such scenarios. 4. Environmental protection and monitoring scenarios are used for environmental protection. Flow monitoring during continuous sampling of atmospheric sampling and process industry online monitoring analytical instruments5. Auxiliary Measurement Scenarios in Process Industry As an auxiliary instrument for constant flow measuremen